IBM pSeries 650, Installation Manual

Page: 133 / 190

16. When you are instructed to remove the adapter from the adapter slot, disconnect any cables that are
connected to the adapter being removed.
17. Go to “Removing a PCI Adapter Cassette” on page 55 to remove the appropriate cassette, then
return here.
18. Install the replacement adapter in the PCI adapter cassette, see “PCI Adapter or Blank Filler Removal
from a Cassette Assembly” on page 67, then return here.
19. Go to “Replacing a PCI Adapter Cassette” on page 58 to install the cassette in the system. Then
return here.
20. Connect the appropriate cables and devices to the adapter.
21. Continue to follow the screen instructions until you receive a message that the replacement is
successful. Successful replacement is indicated by the
OK
message displayed next to the Command
field at the top of the screen.
22. Press the F3 key to return to the PCI Hot-Plug Manager menu.
23. Select Install/Configure Devices Added After IPL and press Enter. Follow the instructions on the
screen. Successful replacement is indicated by the
OK
message displayed next to the Command field
at the top of the screen.
24. Press F10 to exit the Hot-Plug Manager.
25. Install any covers that you removed earlier, and return the system to the normal operations.
Chapter 5. Installing Options
117