IBM PCIe3 x8 SAS RAID internal adapter 6 Gb, Manual

Page: 64 / 130

1. Secure the handle cover to the internal RDX docking station (FC EUA3) by sliding it toward the rear
of the system. See Figure 31.
2. Insert the piece within the handle cover by pushing it firmly into the handle cover as shown in
Figure 32.
3. Place the side cover down over the 8286-41A system.
4. Slide the side cover into place until secured onto the system as shown in the following figure.
Note: Ensure that the side cover tabs are aligned properly.
Figure 31. Securing the handle cover in an 8286-41A stand-alone system
Figure 32. Inserting the piece within the handle cover on an 8286-41A stand-alone system
46
PCIe3 x8 SAS RAID internal adapter 6 Gb