IBM PCIe3 x8 SAS RAID internal adapter 6 Gb, Manual

Page: 54 / 130

a. To obtain a list of all guests, type virsh list .
b.
For each guest in the list, type
virsh shutdown
domain name or type
virsh shutdown
domain ID.
Note:
Type
virsh list
to verify whether all the guests are powered off. If any guest is not powered off,
type
virsh destroy
domain name or type
virsh destroy
domain ID to power off the guest.
3. Run the ipmitool -I lanplus -H FSP IP -P ipmipassword chassis power off command from a remote
system.
Removing and replacing covers on the 5148-21L, 5148-22L, 8247-21L,
8247-22L, 8247-42L, 8284-21A, 8284-22A, 8286-41A, or 8286-42A system
Use these instructions to remove and replace the covers for a 5148-21L, 5148-22L, 8247-21L, 8247-22L,
8247-42L, 8284-21A, 8284-22A, 8286-41A, or 8286-42A system so that you can access the hardware parts or
perform service.
Removing the front cover
Use these instructions to remove the front cover from a 5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L,
8284-21A, 8284-22A, 8286-41A, or 8286-42A system so that you can access the hardware parts or perform
service.
Removing the front cover from a rack-mounted 5148-21L, 5148-22L, 8247-21L,
8247-22L, 8284-21A, or 8284-22A system
Use this procedure to remove the cover from a rack-mounted system so that you can access the
components or perform service.
To remove the front cover, complete the following steps:
1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
2. Remove the two shipping screws (A) (if present) that secure the system to the rack.
Note: Replacing the shipping screws is optional but should be done in geographic areas that are
prone to seismic activity.
3. Pull the cover away from the system. The cover has an indentation where you can hold onto it more
easily.
36
PCIe3 x8 SAS RAID internal adapter 6 Gb