IBM Intellistation POWER 9112 265, User Manual

Page: 62 / 227

Modem Configuration Menu
Entries at the top of the Modem Configuration Menu display the status of the current
selections. Selections are made in the sections, labeled
Modem Ports
and
Modem
Configuration File Name
. Select the serial port that you want to activate and then
select the modem configuration file for the modem on the port. To set up both serial
ports with modems, make your selections one port at a time.
For information on choosing a modem configuration file, see “Sample Modem
Configuration Files” on page 173 and “Transfer of a Modem Session” on page 178.
Modem Configuration Menu
Port 1 Modem Configuration File Name:
Port 2 Modem Configuration File Name:
To make changes, First select the port and then the configuration file
name
Modem Ports:
1. Serial port 1
2. Serial port 2
Modem Configuration File Name:
3. none 9. modem_m0_sp
4. modem_f_sp 10. modem_m1_sp
5. modem_f0_sp
6. modem_f1_sp
7. modem_z_sp
8. modem_z0_sp
30. Save configuration to NVRAM and Configure modem
98. Return to Previous Menu
Serial Port Selection Menu
This menu allows you to enable and/or disable the call-in functions of each serial port in
any combination.
Serial Port Selection Menu
1. Serial Port 1 Call-Out:
Currently Disabled
2. Serial Port 2 Call-Out:
Currently Disabled
3. Serial Port 1 Call-In:
Currently Disabled
4. Serial Port 2 Call-In:
Currently Disabled
98. Return to Previous Menu
42
User’s Guide