IBM Intellistation POWER 9112 265, User Manual

Page: 189 / 227

Appendix E. Service Processor Setup and Test
For your convenience, an example of a basic service processor setup checklist is
included here. Your setup may include more or fewer of the available features, so you
can adjust this checklist for your own application so that it is helpful to you.
Service Processor Setup Checklist
1. Unplug the power cord from the server.
2. Attach a local terminal for this setup procedure.
3. Plug in the system and power on the local terminal.
Attention: Make sure that system power remains off.
4. Start the service processor menus. See “Service Processor Menus” on page 25.
5. Set the system name. See “Privileged User Menus” on page 28.
6. Enable surveillance. See OS Surveillance Setup Menu on page 31.
7. Configure Call-In/Call-Out. See “Call-In/Call-Out Setup Menu” on page 41.
8. Exit the service processor menus.
9. Unplug the power cord from the system.
10. Attach modems (if needed). See “Accessing Service Processor Menus Locally” on
page 25.
11. Plug in the system.
Attention: Make sure that the system power remains off.
12. Test both of the following:
v
Call-In, see “Testing Call-In” on page 170
v
Call-Out, see “Testing Call-Out” on page 170
Your service processor is now ready for use.
169