IBM Intellistation POWER 9112 265, User Manual

Page: 138 / 227

Note: These commands work only when the flags are entered one at a time (such as
those shown in Examples 1 and 2).
/usr/lpp/diagnostics/bin/uesensor -l | -a /usr/lpp/diagnostics/bin/uesensor -t
token -i index [-v]
Flag Description
-l List the sensors and their values in a text format.
-a List the sensors and their values in a numerical format. For each sensor, the
following numerical values are displayed as:
token index status measured value
location code
-t token
Specifies the sensor token to query.
-i index
Specifies the sensor index to query.
-v Indicates to return the sensor measured value. The sensor status is returned
by default.
Examples
1. Display a list of the environmental sensors:
/usr/lpp/diagnostics/bin/uesensor -l
Following is the result of running the example command only:
Sensor = Fan Speed
Status = Normal
Value = 2436 RPM
Location Code = F1
Sensor = Power Supply
Status = Normal
Value = Present and operational
Location Code = V1
Sensor = Power Supply
Status = Critical low
Value = Present and not operational
Location Code = V2
2. Display a list of the environmental sensors in a numerical list:
/usr/lpp/diagnostics/bin/uesensor -a
Following is the result of running the example command only:
3 0 11 87 P1
9001 0 11 2345 F1
9004 0 11 2 V1
9004 1 9 2 V2
3. Return the status of sensor 9004, index 1:
/usr/lpp/diagnostics/bin/uesensor -t 9004 -i 1
Following is the result of running the example command only:
9
118
User’s Guide