manualshive.com logo in svg

IBM IC35L018UCDY10, Specifications

The IBM IC35L018UCDY10 is a high-performance hard drive designed for reliable data storage. With a capacity of {insert capacity}, this product offers ample space for your files. Find the comprehensive specifications and user manual for free download at manualshive.com, ensuring smooth operation and efficient usage of this exceptional storage solution.

Share
Download
background image

Figures

50

Figure 49.  SCSI Control Byte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49

Figure 48.  Supported SCSI commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

44

Figure 47.  Interface definition mark, SCSI LVD/SE multimode . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43

Figure 46.  A-weighted sound power levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

41

Figure 45.  Random vibration PSD profile breakpoints (non-operating) . . . . . . . . . . . . . . . . . . . . .

41

Figure 44.  Random vibration PSD profile breakpoints (operating) . . . . . . . . . . . . . . . . . . . . . . . . .

40

Figure 43.  Breather hole location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39

Figure 42.  Mounting positions and tappings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38

Figure 41.  Interface connector for 80-pin models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38

Figure 40.  Interface connector for 68-pin models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37

Figure 39.  Mechanical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

37

Figure 38.  Physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Figure 37.  Outline of the 80-pin model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36

Figure 36.  Outline of the 68-pin model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Figure 35.  Power consumption efficiency index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Figure 34.  Power supply generated ripple at drive power connector . . . . . . . . . . . . . . . . . . . . . . .

33

Figure 33.  Power supply current of 18-GB models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33

Figure 32.  Power supply current of 36-GB models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Figure 32.  Power supply current of 73-GB models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Figure 31.  Power supply current of 146-GB models

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32

Figure 30.  Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Figure 29.  Module location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

31

Figure 28.  Maximum allowable module surface temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

Figure 27.  Temperature and relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30

Figure 26.  Operating and non-operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29

Figure 25.  SCSI device ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28

Figure 24.  LED circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Figure 23.  Auto Start Delay & Delay Start 6/12 drive behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

Figure 22.  Jumper pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Figure 21.  Auxiliary connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

Figure 20.  Table of signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Figure 19.

 

 Table of signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Figure 18.  Power connector pin assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Figure 17.  P-List physical format   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Figure 16.  Random access performance (sector size 512 bytes case)

. . . . . . . . . . . . . . . . . . . .

16

Figure 15.  Simple sequential access performance (sector size 512 byte case)

. . . . . . . . . . . . .

15

Figure 14.  Data transfer speed (sector size 512 bytes case) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Figure 13.  Spindle stop time

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Figure 12.  Drive ready time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Figure 11.  Latency time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Figure 10.  Head skew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Figure 9.  Cylinder Skew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Figure 8.  Full stroke seek time

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Figure 7.  Mechanical positioning performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Figure 6.  Command overhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Figure 5.  Cylinder allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Figure 4.  Block assignment of World Wide ID in Inquiry Command . . . . . . . . . . . . . . . . . . . . . . . .

10

Figure 3.  Product ID in Inquiry Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Figure 2.  Data sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Figure 1.  Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ultrastar 146Z10 hard disk drive specifications

ix

Summary of Contents for IC35L018UCDY10


























































































































































































































































Reviews:

No comments

Related manuals for IC35L018UCDY10

Gardiun Cambridge Instruction Manual preview
Cambridge
Brand: Gardiun Pages: 27
IBM 3340 Reference Manual preview
3340
Brand: IBM Pages: 62
SentrySafe H0100 Manual preview
H0100
Brand: SentrySafe Pages: 2
MSW MSW-STSH-19 User Manual preview
MSW-STSH-19
Brand: MSW Pages: 46
OCZ VERTEX 2 SATA II 3.5 Datasheet preview
VERTEX 2 SATA II 3.5
Brand: OCZ Pages: 3
Medion P83771 Instruction Manual preview
P83771
Brand: Medion Pages: 37
R&S SpycerBox Cell Hardware Manual preview
SpycerBox Cell
Brand: R&S Pages: 78
extraspace expandacom Assembly Instructions Manual preview
expandacom
Brand: extraspace Pages: 16
U-Line H-3619 Assembly Instructions Manual preview
H-3619
Brand: U-Line Pages: 15
Western Digital SiliconEdge Blue Series Brochure & Specs preview
SiliconEdge Blue Series
Brand: Western Digital Pages: 2
Seagate BARRACUDA ST32000542AS Datasheet preview
BARRACUDA ST32000542AS
Brand: Seagate Pages: 2
QNAP TS-h2483XU-RP Series Quick Installation Manual preview
TS-h2483XU-RP Series
Brand: QNAP Pages: 12
LOOQS MB202 User Manual preview
MB202
Brand: LOOQS Pages: 69
MicroNet DataDock 350 User Manual preview
DataDock 350
Brand: MicroNet Pages: 33
DuraMax Insulated Cabin Owner'S Manual/ Instructions For Assembly preview
Insulated Cabin
Brand: DuraMax Pages: 38
PINIE SCHOOL 1 Assembly Instructions Manual preview
SCHOOL 1
Brand: PINIE Pages: 8
HP StoreEasy 1460 Quick Start Manual preview
StoreEasy 1460
Brand: HP Pages: 16
Huawei SmartLi Series User Manual preview
SmartLi Series
Brand: Huawei Pages: 116

Brands by name

Popular brands

Load more brands