manualshive.com logo in svg

IBM IC35L018UCDY10, Specifications

The IBM IC35L018UCDY10 is a high-performance hard drive designed for reliable data storage. With a capacity of {insert capacity}, this product offers ample space for your files. Find the comprehensive specifications and user manual for free download at manualshive.com, ensuring smooth operation and efficient usage of this exceptional storage solution.

Share
Download
background image

226

Figure 210. Sense Data Byte 22 POR Error . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

225

Figure 209. Sense Data Byte 21 for POR Step . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

225

Figure 208. Sense Data Byte 20 for POR Step

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

224

Figure 207.

 

Sense Data Byte 18 for Error Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

Figure 206. Progress Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

223

Figure 205. Actual Retry Count

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

222

Figure 204. Field Pointer Bytes

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

221

Figure 203. Sense Key / Sense Code / Qualifier combinations (4 of 4)  . . . . . . . . . . . . . . . . . . .

220

Figure 202. Sense Key / Sense Code / Qualifier combinations (3 of 4) . . . . . . . . . . . . . . . . . . . .

219

Figure 201. Sense Key / Sense Code / Qualifier combinations (2 of 4) . . . . . . . . . . . . . . . . . . . .

218

Figure 200. Sense Key / Sense Code / Qualifier combinations (1 of 4) . . . . . . . . . . . . . . . . . . . .

215

Figure 199. Format of Sense Data.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

213

Figure 198. Self-test menu for SEND DIAGNOSTIC command . . . . . . . . . . . . . . . . . . . . . . . . . .

203

Figure 197. Format Command Failure Degraded Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

202

Figure 196. Self Configuration Failure Degraded Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

201

Figure 195. Spindle Motor Degraded Mode - Spindle Stopped by Start Stop Unit

Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

200

Figure 194. Spindle Motor Degraded Mode - Spindle Start Failure . . . . . . . . . . . . . . . . . . . . . . . .

199

Figure 193. Spindle Motor Degraded Mode - Auto Start Delay/Spinning Up . . . . . . . . . . . . . . . .

198

Figure 192. Spindle Motor Degraded Mode - Disable Auto Start

. . . . . . . . . . . . . . . . . . . . . . . . .

188

Figure 191. Ignore Wide Residue Message Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

187

Figure 190. Queue Tag Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

184

Figure 189. Initiator Request/Target Response (DT_REQ = 0, IU_REQ = 0 . . . . . . . . . . . . . . . .

184

Figure 188. Initiator Request/Target Response (DT_REQ = 1, IU_REQ = 0 . . . . . . . . . . . . . . . .

183

Figure 187. Initiator Request/Target Response (DT_REQ = 1, IU_REQ = 1) . . . . . . . . . . . . . . .

183

Figure 186. Parallel Protocol Request. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

182

Figure 185. Target Request to Initiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

181

Figure 184. Initiator Request/Target Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

181

Figure 183. Wide Data Transfer Request.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

180

Figure 182. Drive Response to Initiator's Transfer Period (SE mode) . . . . . . . . . . . . . . . . . . . . .

180

Figure 181. Target Response to Initiator's Transfer Period (LVD mode) . . . . . . . . . . . . . . . . . . .

179

Figure 180. Initiator Request/Drive Response (SE mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

179

Figure 179. Initiator Request/Drive Response (LVD mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

178

Figure 178. Synchronous Data Transfer Request.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

177

Figure 177. Supported Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

175

Figure 176. SCSI Status Byte. Format of the SCSI STATUS byte.  . . . . . . . . . . . . . . . . . . . . . . .

174

Figure 175. WRITE SAME (41)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

173

Figure 174. WRITE LONG

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

170

Figure 173. WRITE BUFFER Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

169

Figure 172. WRITE BUFFER (3B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

168

Figure 171. WRITE AND VERIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

167

Figure 170. WRITE (10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

166

Figure 169. WRITE (6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

165

Figure 168. VERIFY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

164

Figure 167. TEST UNIT READY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

163

Figure 166. SYNCHRONIZE CACHE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

162

Figure 165. START STOP Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161

Figure 164. SET DEVICE IDENTIFIER Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

161

Figure 163. SET DEVICE IDENTIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

160

Figure 162. Send Diagnostic Page 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

160

Figure 161. Address to translate

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

Figure 160. Diagnostic Page 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

159

Figure 159. Diagnostic Page 0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

158

Figure 158. SEND DIAGNOSTIC (1D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ultrastar 146Z10 hard disk drive specifications

xii

Summary of Contents for IC35L018UCDY10


























































































































































































































































Reviews:

No comments

Related manuals for IC35L018UCDY10

LaCie d2 Ethernet Disk mini Quick Install Manual preview
d2 Ethernet Disk mini
Brand: LaCie Pages: 23
GrainPro Cocoon Indoor Instruction Manual preview
Cocoon Indoor
Brand: GrainPro Pages: 19
PNY DUO LINK User Manual preview
DUO LINK
Brand: PNY Pages: 17
Forest garden OPATSFP Quick Start Manual preview
OPATSFP
Brand: Forest garden Pages: 4
LaCie Biggest S2S Brochure & Specs preview
Biggest S2S
Brand: LaCie Pages: 2
Blueshark Studio Vertical Modular Paint Storage Instructions Manual preview
Vertical Modular Paint Storage
Brand: Blueshark Studio Pages: 7
Dancover ST03850 Manual preview
ST03850
Brand: Dancover Pages: 12
IBM DCS3700 Quick Start Manual preview
DCS3700
Brand: IBM Pages: 21
Argus SD-0512 Specification Sheet preview
SD-0512
Brand: Argus Pages: 1
Kvaser Memorator Pro 5xHS User Manual preview
Memorator Pro 5xHS
Brand: Kvaser Pages: 27
Verbatim Portable Hard Drive User Manual preview
Portable Hard Drive
Brand: Verbatim Pages: 90
eSafe Bulkbox User Manual preview
Bulkbox
Brand: eSafe Pages: 12
Supermicro Supero 6037R-E1R16N User Manual preview
Supero 6037R-E1R16N
Brand: Supermicro Pages: 75
Draper 77020 Original Instructions Manual preview
77020
Brand: Draper Pages: 9
Franklin Bible Challenge XBT-2058 User Manual preview
Bible Challenge XBT-2058
Brand: Franklin Pages: 23
Fritz! AC 860 Installation And Operation Manual preview
AC 860
Brand: Fritz! Pages: 32
LaCie Rikiki Specifications preview
Rikiki
Brand: LaCie Pages: 2
LaCie LaCie Little Big Disk 301088 Specification preview
LaCie Little Big Disk 301088
Brand: LaCie Pages: 2

Brands by name

Popular brands

Load more brands