IBM IC35L018UCDY10, Specifications

Page: 150 / 249

8.19 READ DEFECT DATA (10) (37h)
LINK FLAG Reserved = 0 VU = 0 9
(MSB) Allocation Length
(LSB)
7
8
Reserved = 0
3
4
5
6
Defect List Format G-List P-list Reserved = 0 2
0 Reserved = 0 Reserved = 0 1
Command Code = 37h 0
0 1 2 3 4 5 6 7
Bit
Byte
Figure 129. Read Defect Data (10)
The READ DEFECT DATA command requests that the drive transfer the medium defect data to the
initiator.
If the drive is unable to access any medium defect data it will return a CHECK CONDITION status with the
appropriate sense key. The sense key will be set to either MEDIUM ERROR(03h) if a medium error
occurred or NO SENSE(00h) if the list does not exist and the additional sense code will be set to DEFECT
LIST ERROR (19h).
!
P-list (Primary Defect List) bit set to one indicates that the drive returns the primary list of defects. A
P-list bit of zero indicates that the drive shall not return the Primary Defect list of defects.
!
G-list (Grown Defect List) bit set to one indicates that the drive returns the Grown Defect List. A G-List
bit of zero indicates that the drive shall not return the Grown Defect List of defects.
Note: With both bits set to one P-list and G-List the drive will return both the Primary and Grown defect
lists. With both bits set to zero, the drive will return only a four-byte Defect List Header.
!
Defect List format is used by the initiator to indicate the preferred format for the defect list.
The Defect List Format of '100 (Bytes from Index Format)' and '101 (Physical Sector Format)' are sup-
ported. If the requested format is not supported by the drive, it will return the defect list in its default format
'101' and then terminate the command with CHECK CONDITION status. The sense key will be set to
RECOVERED ERROR(01h) and the additional sense code will be set to DEFECT LIST NOT
FOUND(1Ch).
The drive will transfer all of the Read Defect Data up to the number of bytes allocated by the initiator.
Note: The drive will terminate the Data In phase when the Allocation Length has been transferred or when
all available Defect Data has been transferred to the initiator, whichever is less.
The Read Defect Data contains a four byte header followed by zero or more defect descriptors.
Ultrastar 146Z10 hard disk drive specifications
134