IBM HS40 - BladeCenter - 8839, Setup Manual

Page: 48 / 64

The following illustration shows the SOL status page for an advanced management
module.
For advanced management modules, the SOL Session status for each blade server
has five possible states:
Unknown
This status indicates that the status of the SOL session is not known. It
might indicate that the blade server is still being discovered.
Disabled
This status indicates that SOL is disabled for the blade server.
No session
This status indicates that no SOL session is available between the
management module and the blade server. It might indicate that there was
an SOL session setup failure that must be investigated.
Ready
This status indicates that an SOL session is established between the
management module and the blade server. This SOL session is available to
connect to a Telnet session, if one is requested by the user.
Active
This status indicates that there is an SOL session between the management
module and the blade server and that this session is currently connected to
a Telnet session.
For advanced management modules, click the SOL Status icon for a blade server
to see a detailed summary of the condition for that blade server and recommended
actions. You can also click the
SOL Status Summary link to see the status
summary information for all the blader servers managed by the advanced
management module.
42
BladeCenter: Serial over LAN Setup Guide