| Watch Folders and the Aspera Watch Service |
191
Option
Description
Default
policy
Defines how FASPStream manages the bandwidth. The policy can
be set to the following values:
•
FIXED
•
FAIR
•
HIGH
•
LOW
FAIR
min_rate
Attempt to transfer no slower than the specified minimum transfer
rate.
0B
target_rate
The target transfer rate. Transfer at rates up to the specified target
rate. This option accepts suffixes T for terabits/s, G for gigabits/
s, M for megabits/s, K for kilobits/s, or B for bits/s. Decimals are
allowed. If this option is not set by the client, the setting in the
server's
aspera.conf
is used. If a rate cap is set in the local or
server
aspera.conf
, the rate does not exceed the cap.
10M
tcp_port
The port to use for SSH connections.
22
udp_port
The port to use for UDP connections.
33001
datagram_size
The datagram size (MTU) for FASP.
The detected path
MTU.
cipher
The encryption cipher that is used to encrypt streamed data in transit,
either
NONE
and
AES128
.
AES128
completion_timeout
How long to wait before the session is considered complete. A
growing file is considered complete when no new data arrives within
the timeout period.
5s
force_send_after
Force FASPStream to send data after the given time, even if the
chunk is not full.
2s
memory
The maximum amount of memory FASPStream is allowed to use.
2M
chunk_size
Packet size for transfers over the network.
128K
filters
Select growing files to include in the package as those that match the
specified filters. Use the same syntax as in the "filters" object.
N/A
The
watchd
Object
Use to manage watchd services for pull Watch Folders when asperawatchd is run on a different node than
asperawatchfolderd.
{
...
"watchd": {
"scan_period": "30m",
"identifier": "
daemon
",
"connection":{
"type": "NONE|REDIS|NODE",
"host": "
ip_address
",
"port":
port
,
"authentication": {
"type":"NODE_BASIC",
"user": "
node_username
",
"pass": "
node_password
"
