IBM 9234CNU - Lotus Foundations Server, Service Manual

Page: 61 / 152

5. Reconnect any cables that you disconnected during removal.
6. Install the side cover (see “Installing the side cover” on page 31).
7. Lock the side cover if you unlocked it during removal.
8. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Replacing an LCD display and control panel
To replace the LCD display, complete the following steps:
1. With the server powered off and the power cable removed, detach the server
side cover.
2. Detach the front upper bezel of the server.
3. Detach the cables connected to the LCD display. Make sure you note the
cables that were disconnected as the replacement unit will need to be
reconnected in the exact same way.
4. Detach the LCD display from the front of the server and slide the unit out of the
bay.
5. Insert the replacement unit into the same bay, ensuring that it is properly
secured to the server cage.
6. Reconnect the same wires that were connected to the previous LCD display.
7. Reconnect the upper bezel and attach the side cover of the server.
Chapter 4. Removing and replacing server components
43