IBM 866631Y - Netfinity 7100 - 8666, Hardware Maintenance Manual

Page: 97 / 198

v
If you click No the commands are saved to a file named CONFIG.NEW in
the destination directory (and to AUTOEXEC.NEW, if appropriate) so that
they can be added later.
11.
The installation is now complete. Shut down and restart the system for the
system configuration changes to take effect.
Netfinity Manager database support
Netfinity Manager supports the collection and export of a vast amount of
system-specific data to a Netfinity Manager database.
Netfinity Manager databases can be created on database management systems
using DB2
®
, Lotus Notes
®
, or Microsoft SQL. Microsoft SQL is supported through
open database connectivity (ODBC), and is available on systems running Netfinity
Manager for OS/2, Windows 95, or Windows NT. If the system supports ODBC,
the user can access and export DB2 data through ODBC as well. Once support for
one or more of these databases has been installed along with Netfinity Manager,
data can be exported from these Netfinity Manager services:
v
Alert Manager
v
Software Inventory
v
System Information Tool
v
System Profile
v
System Monitor
Information on how to install and configure support for database export follows.
v
If support for DB2 database export is being installed, see “DB2 database
support”.
v
If support for Lotus Notes database export is being installed, see “Lotus Notes
database support” on page 91.
v
If support for ODBC database export is being installed, see “ODBC database
support” on page 93.
DB2 database support
Support for DB2 database export is automatically configured during installation of
the Netfinity Manager. However, the database system itself must be configured.
Instructions for configuring the database follow.
A raw data dump to a file is also available and will run without a database.
System requirements
Netfinity Manager DB2 database export is supported on systems running Netfinity
Manager for OS/2, Netfinity Manager for Windows 95, Netfinity Manager for
Windows 98, and Netfinity Manager for Windows NT. For more information about
supported version numbers refer to Table 18 on page 96 and Table 19 on page 96.
Attention: Using Netfinity Manager database support with systems running
unsupported versions of DB2 or the DB2 Client might cause unpredictable results
and might halt the system.
See the DB2 Installation Guide for general requirements and supported protocols.
Installing and configuring the database
The following information describes the steps to install and configure the DB2
database.
Netfinity Manager
87