IBM 866631Y - Netfinity 7100 - 8666, Hardware Maintenance Manual

Page: 90 / 198

Netfinity Manager supports only server-to-server communications
between systems running Microsoft SNA Server software. However,
Netfinity Manager systems running Microsoft SNA Server can
communicate with Netfinity Manager systems using any of the other
supported SNA stacks.
v
A 9600 baud or greater modem (optional).
The hard disk requirement for Client Services for Netfinity Manager is
6.5 MB–9 MB of hard disk space. All other system requirements are the same as
for Netfinity Manager for Windows NT.
Note: Serial Connection Control will not function on systems that do not have a
properly installed and configured modem.
Netfinity Manager for Windows NT system requirements
The minimum system requirements for Netfinity Manager for Windows NT are:
v
Microsoft Windows NT version 4.0 or later
v
Approximately 17 MB–20 MB of hard disk space (space required depends on
system configuration)
v
A LAN adapter card and one or more of the following communications
protocols:
– TCP/IP (must be WinSock Version 1.1-compatible; required for Netfinity
Manager with Web Enhancement)
– NetBIOS
Note: The Netfinity Manager NetBIOS requirements are three names, two
sessions, and nine network control blocks (NCBs).
– IPX
– SNA (Microsoft SNA Server version 2.11 with Service Pack 1 and
WCPIC32.DLL dated 01/22/97 or later. This DLL is available from Microsoft)
Note: Systems using Netfinity Manager with Microsoft SNA Server cannot
communicate with systems running the Microsoft SNA Server client.
Netfinity Manager supports only server-to-server communications
between systems running Microsoft SNA Server software. However,
Netfinity Manager systems running Microsoft SNA Server can
communicate with Netfinity Manager systems using any of the other
supported SNA stacks.
v
A 9600 baud or greater modem (optional).
The hard disk requirement for Client Services for Netfinity Manager is
6.5 MB–9 MB of hard disk space. All other system requirements are the same as
for Netfinity Manager for Windows NT.
Notes:
1. Serial Connection Control will not function on systems that do not have a
properly installed and configured modem.
2.
To most effectively manage Windows NT systems, any user that will be using
Netfinity Manager on a Windows NT system (locally or remotely) must have
administrator-level access to the system.
80
Hardware Maintenance Manual: Netfinity 7100 – Type 8666