IBM 866631Y - Netfinity 7100 - 8666, Hardware Maintenance Manual

Page: 108 / 198

c. The Netfinity Manager folder also contains a Netfinity Database
Administration object. You can use Netfinity Database Administration to
configure Netfinity Manager database support. For more information on
Database Administration, see “ODBC Database Support” in
Netfinity
Manager Quick Beginnings .
2. Start the Netfinity Service Manager.
To start the Netfinity Service Manager, double-click the Netfinity Service
Manager object.
Netfinity Manager Service Manager
All Netfinity Manager services that are supported by the operating system can be
started from the Netfinity Manager Service Manager window. The services that are
available for use depend on the installation configuration that was selected during
installation.
To start any Netfinity Manager service that appears in the Service Manager
window, double-click the icon for that service. To start a Netfinity Manager service
on a remote system, use the Remote System Manager service.
Netfinity Manager service descriptions
Each Netfinity Manager service consists of a base program and a graphical user
interface (GUI). The service base programs enable the individual services to be
accessed remotely by Netfinity Manager, but do not allow for local access. The
service GUIs, when functioning along with their respective base program, enable
access to the service.
Some services are available only on systems with certain system configurations.
These services are:
v
Alert on LAN Configuration (available only on systems running Windows 95 or
later or Windows NT 4.0 or later)
v
Capacity Management (available only on systems running Windows NT 4.0 or
later)
v
Cluster Manager (available only on systems running Windows NT 4.0 or later)
v
DMI Browser (requires DMI Service Layer)
v
ECC Memory Setup (requires ECC memory)
98
Hardware Maintenance Manual: Netfinity 7100 – Type 8666