IBM 866631Y - Netfinity 7100 - 8666 Hardware Maintenance Manual Download Page 120

Page: 120 / 198

Disconnecting the shuttle

Review the information in “Before you begin” on page 43.

Power-off the server, if it is on.

Disconnect the power cord for each power source from the electrical outlet.
Attention:

The presence of ac standby power might result in damage to the

hardware unless you disconnect the power cord for each power source from
the electrical outlet.

Remove the top cover (see “Removing the top cover” on page 45).

Flip the top end of each diagonal side latch inward.

Move each latch toward the rear of the shuttle until the latch is vertical.

Fold the hinged top end of each latch outwards at the notch of the chassis.

Slide the shuttle toward the rear of the server.

To remove the shuttle, see “Removing the shuttle” on page 116.

110

Hardware Maintenance Manual: Netfinity 7100 – Type 8666

Summary of Contents for 866631Y - Netfinity 7100 - 8666







































































































































































































Search results

Summary of Contents for 866631Y - Netfinity 7100 - 8666

Reviews:

Related manuals for 866631Y - Netfinity 7100 - 8666

Brands by name

Popular brands

IBM 866631Y - Netfinity 7100 - 8666, Hardware Maintenance Manual

Search results

Summary of Contents for 866631Y - Netfinity 7100 - 8666

Reviews:

Related manuals for 866631Y - Netfinity 7100 - 8666

Brands by name

Popular brands