IBM 866631Y - Netfinity 7100 - 8666 Hardware Maintenance Manual Download Page 126

Page: 126 / 198

Removing the shuttle

Power-off the server, if it is on.

Disconnect the power cord for each power supply from the electrical outlet.
Attention:

The presence of ac standby power might result in damage to the

hardware unless you disconnect the power cord for each power supply from
the electrical outlet.

Remove the top cover (see “Removing the top cover” on page 45).

Disconnect the shuttle (see “Disconnecting the shuttle” on page 110.)

Place one hand on the handle at the front portion of the shuttle, and place the
other hand on the ledge at the rear of the shuttle.

Lift the shuttle at an angle with the rear of the shuttle being removed first and
remove the shuttle from the server.

SCSI backplane assembly

Review the information in “Before you begin” on page 43.

«1¬

SCSI backplane

Power-off the server, if it is on.

Disconnect the power cord for each power source from the electrical outlet.
Attention:

The presence of ac standby power might result in damage to the

hardware unless you disconnect the power cord for each power source from
the electrical outlet.

116

Hardware Maintenance Manual: Netfinity 7100 – Type 8666

Summary of Contents for 866631Y - Netfinity 7100 - 8666







































































































































































































Search results

Summary of Contents for 866631Y - Netfinity 7100 - 8666

Reviews:

Related manuals for 866631Y - Netfinity 7100 - 8666

Brands by name

Popular brands

IBM 866631Y - Netfinity 7100 - 8666, Hardware Maintenance Manual

Search results

Summary of Contents for 866631Y - Netfinity 7100 - 8666

Reviews:

Related manuals for 866631Y - Netfinity 7100 - 8666

Brands by name

Popular brands