IBM 7133 D40 Operator'S Manual Download Page 8 | Manualshive

Page: 8 / 106

background image

International Electrotechnical Commission (IEC) Statement

This product has been designed and built to comply with (IEC) Standard 950.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Industry Canada Compliance Statement

This Class A digital apparatus complies with IECS-003.

United Kingdom Telecommunications Requirements

This apparatus is manufactured to the International Safety Standard EN60950 and as
such is approved in the U.K. under approval number NS/G/1234/J/100003 for indirect
connection to public telecommunications systems in the United Kingdom.

European Union (EU) Statement

This product is in conformity with the protection requirements of EU council directive
89/336/EEC on the approximation of the laws of the Member States relating to
electromagnetic compatibility. Neither the provider nor the manufacturer can accept
responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the fitting of option cards not
supplied by the manufacturer.

Radio Protection for Germany

Zulassungsbescheinigung laut Gesetz über die elektromagnetische Verträglichkeit
von Geräten (EMVG) vom 30, August 1995.

Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG das
EG–Konformitätszeichen zu führen.

Der Aussteller der Konformitätserklärung ist die IBM Deutschland.

Informationen in Hinsicht EMVG Paragraph 3 Abs. (2):

Das Gerät erfüllt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse A.

EN55022 Klasse A Geräte bedürfen folgender Hinweise:

Nach dem EMVG: “Geräte dürfen an Orten, für die sie nicht ausreichend entstört sind,
nur mit besonderer Genehmigung des Bundesministeriums für Post und
Telekommunikation oder des Bundesamtes für Post und Telekommunikation betrieben
werden. Die Genehmigung wird erteilt, wenn keine elektromagnetischen Störungen zu
erwarten sind.” (Auszug aus dem EMVG, Para.3, Abs.4). Dieses

vi

7133 Models D40 and T40 Operator Guide

«
...
6
7
8
9
10
...
»

Summary of Contents for 7133 D40











































































































Reviews:

No comments

Related manuals for 7133 D40

Brand: Tripp Lite Pages: 20

Brand: Accusys Pages: 34

Brand: TFortis Pages: 86

Brand: Airlink101 Pages: 46

Brand: Xilinx Pages: 29

Brand: AES Pages: 44

Brand: WTI Pages: 178

EZ-KIT LITE ADSP-2191

Brand: Analog Devices Pages: 98

Brand: ADTRAN Pages: 20

Brand: WiebeTech Pages: 8

Threat Analysis Reporter TAR

Brand: 8e6 Technologies Pages: 76

Altusen SN0100 Series

Brand: ATEN Pages: 178

CU8210-D001-0200

Brand: Beckhoff Pages: 25

Brand: Z3 Technology Pages: 94

Brand: Garner Pages: 13

Indigo 4 CoolFlow

Brand: Crystal Vision Pages: 49

Brand: CAME Pages: 24

Brand: StarTech.com Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands