IBM 6862 - PC 300 PL, User Manual

Page: 80 / 208

Starting and using the program
To start the Configuration/Setup Utility program:
1. Turn on your computer. If your computer is already on when you start this
procedure, you must shut down the operating system, turn off the computer,
wait a few seconds until all in-use lights go off, and restart the computer. (Do
not use Ctrl+Alt+Del to restart the computer.)
2. When the Configuration/Setup Utility program prompt appears in the lower left
corner of the screen during startup, press F1. (The Configuration/Setup Utility
program prompt appears on the screen for only a few seconds. You must press
F1
quickly.)
3. If you have not set an administrator password, the Configuration/Setup Utility
program menu appears on the screen. If you have set an administrator
password, the Configuration/Setup Utility program menu will not appear until
you type your administrator password at the password prompt and press Enter.
See “Using a power-on password” on page 67 and “Using an administrator
password” on page 71 for more information.
The menu you see on your computer might look slightly different from the menu
shown here, but it will operate the same way.
Configuration/Setup Utility
Select Option:
Ÿ
System Summary
Ÿ
Product Data
Ÿ
Devices and I/O Ports
Ÿ
Start Options
Ÿ
Date and Time
Ÿ
System Security
Ÿ
Advanced Setup
Ÿ
ISA Legacy Resources
Ÿ
Power Management
Save Settings
Restore Settings
Load Default Settings
Exit Setup
62
Using Your Personal Computer