IBM 6862 - PC 300 PL, User Manual

Page: 177 / 208

following sections. If you experience any error related to the integrated Ethernet
controller, record the error message, and tell your network administrator about the
problem.
The two most common error messages are:
RPL-ROM-ERR: 1ð5 The integrated Ethernet failed the loopback test.
RPL-ROM-ERR: 1ð7 Media test failed; check the cable.
Error 105 indicates that a power-on diagnostic test performed by the Ethernet
module did not execute correctly. If this error message appears, you must have the
server serviced. Error 107 indicates that the cable from the LAN is not securely
connected to the Ethernet port on your server. Check the cable to ensure that it is
properly connected.
Appendix B. Additional Ethernet information
159