IBM 51, Troubleshooting Manual

Page: 228 / 248

application server for the recovery service.
CTGEM0155I The recovery service started
successfully.
Explanation: No additional information is available
for this message.
CTGEM0156I The registration server was missing
Explanation: No additional information is available
for this message.
CTGEM0157I Registration server trust failure
Explanation: No additional information is available
for this message.
CTGEM0158I The registration was rejected
Explanation: No additional information is available
for this message.
CTGEM0159I The status server was missing
Explanation: No additional information is available
for this message.
CTGEM0160I Status server trust failure
Explanation: No additional information is available
for this message.
CTGEM0161I Unknown reason
Explanation: No additional information is available
for this message.
CTGEM0162I The recovery service received a
recovery request.
Reason: reasons_for_recovery_request
Operating system GUID of the common
agent: GUID
Reported host name: host_name
Observed host name: host_name
Reported IP address: IP_address
Observed IP address: IP_address
Explanation: This message records that a common
agent submitted a recovery request. The message
contains information about the agent that submitted the
recovery request and the reasons that it submitted a
recovery request.
Potential reasons for submitting a recovery request are
listed in messages CTGEM0155I through CTGEM0161I.
CTGEM2000E The agent manager cannot find the
requested message.
The message key is message_key .
The message bundle is message_bundle .
Explanation: The agent manager attempted to log the
message identified by message key message_key , but the
message is not in the message bundle. Probable causes
for this problem are:
v The message bundle file, message_bundle , does not
exist
v
The message bundle was found but does not contain
the specified message key
v
The message bundle is in the wrong directory
Administrator Response: Collect the message and
trace files and contact IBM Customer Support.
CTGEM2100I The WebSphere configuration script
script_name started. The action taken is
action_code .
Explanation: No additional information is available
for this message.
CTGEM2101I The WebSphere configuration script
script_name
completed successfully.
Explanation: No additional information is available
for this message.
CTGEM2102E The WebSphere configuration script
script_name completed with the
following error: error
Explanation: The WebSphere configuration script
script_name completed but returned the error identified
by error . This can indicate a programming error.
Administrator Response: Save the message and trace
files (msg_EPM_Install.log and trace_EPM_Install.log),
and then contact IBM Customer Support.
CTGEM2103E The required property property is
missing.
Explanation: The property property is required but was
not supplied. To find out which script failed, read the
text of message CTGEM2100I, which occurs earlier in
this message file (msg_EPM_Install.log).
Administrator Response: Save the message and trace
files (msg_EPM_Install.log and trace_EPM_Install.log),
and then contact IBM Customer Support.
CTGEM2104E The action specified by the action
argument is not accepted by this script.
The action must be either action_1 or
action_2 .
Explanation: The command-line argument action is not
216
Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide