IBM 51, Troubleshooting Manual

Page: 201 / 248

System action: The bundle was not installed.
Administrator Response: Verify that the specified
bundle is the one you intended to install. If you want
to replace this bundle you must first uninstall it, then
install the bundle again, or try updating it.
BTC3106I The system is retrieving a
LifecycleActivator from the bundle_name
bundle.
Explanation: A lifecycle activator was found in the
bundle and retrieved.
System action: A lifecycle activator was found in the
bundle and retrieved.
BTC3107I The system has invoked preUpdate in
the LifecycleActivator for the
bundle_name bundle.
Explanation: The preUpdate logic defined in the
LifecycleActivator was invoked.
System action: The preUpdate logic defined in the
LifecycleActivator was invoked.
BTC3108I The system has invoked postUpdate in
the LifecycleActivator for the
bundle_name bundle.
Explanation: The postUpdate logic that is defined in
the LifecycleActivator was invoked.
System action: The postUpdate logic that is defined in
the LifecycleActivator was invoked.
BTC3109I The system has invoked preUninstall in
the LifecycleActivator for the
bundle_name bundle.
Explanation: The preUninstall logic defined in the
LifecycleActivator was invoked.
System action: The preUninstall logic defined in the
LifecycleActivator was invoked.
BTC3110I The system invoked postInstall in the
LifecycleActivator for the bundle_name
bundle.
Explanation: The postInstall logic defined in the
LifecycleActivator was invoked.
System action: The postInstall logic defined in the
LifecycleActivator was invoked.
BTC3111E The system cannot read or write to the
config/endpoint.properties file. Verify
that the agent configuration file is on
the file system.
Explanation: The config/endpoint.properties file does
not exist or the user account that runs the common
agent does not have the correct file permissions.
Administrator Response: Verify that the file exists and
that the user account has the appropriate read and
write permission.
BTC3112E The system encountered an error while
handling the subagent bundle count
variable in endpoint.properties. Make
sure it is stored in the correct numerical
format.
Explanation: The subagent bundle count variable in
the config/endpoint.properties file could not be
interpreted.
System action: The number of subagent bundles that
are installed on the system might be misrepresented.
Administrator Response: Verify that the
config/endpoint.properties file exists and that the user
account has the appropriate read/write permission.
Make sure that the subagent bundle count variable is
present in the file.
BTC3113I The deployer service has been
successfully deployed and started.
Explanation: No additional information is available
for this message.
BTC3114I The deployer service has been
successfully undeployed and stopped.
Explanation: No additional information is available
for this message.
BTC3115E The post installation failed.
Explanation: The postInstall logic specified in the
bundle LifecycleActivator failed.
System action: The postInstall logic was not
completed successfully. The bundle might not be
installed correctly.
Administrator Response: If you continue to
encountered problems with the bundle, attempt to
uninstall and reinstall the bundle.
BTC3116E The post activity update of the bundle
failed.
Explanation: postUpdate logic specified in the bundle
LifecycleActivator failed.
System action: The postUpdate logic was not
completed successfully. The bundle might not be
updated correctly.
Administrator Response: If you continue to
experience problems with the bundle, try uninstalling
and reinstalling the bundle.
Chapter 11. Tivoli Common Agent Services messages
189