IBM 51, Troubleshooting Manual

Page: 172 / 248

the transitions and then try again.
COPTDM102E The system cannot stop the
monitoring resource " VALUE_0 " using
the " VALUE_1 " monitoring application.
Request ID " VALUE_2 ".
Explanation: The system cannot stop monitoring the
resource.
Operator response: Search the workflow execution
history for errors that use the request ID. Review all
the transitions and then try again.
COPTDM103E The system cannot uninstall the
application on VALUE_0 .
Explanation: No additional information is available
for this message.
COPTDM104E The system detected an exception in
the Java Static Method Invocation
command driver
(MethodInvocationVariableBroker).
Explanation:
No additional information is available
for this message.
COPTDM105E An error occurred in the embedded
logical device operation.
Explanation: No additional information is available
for this message.
COPTDM106E The system cannot find compatible
SAPs between device ID " VALUE_0 " and
" VALUE_1 " for operation " VALUE_2 ".
Explanation: No additional information is available
for this message.
COPTDM107E The argument ( VALUE_0 =" VALUE_1 ")
is not valid. Make sure that the
parameter is of the right type and that it
is not empty.
Explanation: No additional information is available
for this message.
COPTDM108E The integer value " VALUE_0 " is not
valid.
Explanation: No additional information is available
for this message.
COPTDM109E The load balancing algorithm
" VALUE_0 " is not valid.
Explanation: No additional information is available
for this message.
COPTDM110E The SNMP value
( VALUE_0 =" VALUE_1 ", type VALUE_2 ) is
not valid.
Explanation: No additional information is available
for this message.
COPTDM111E The SSH path is not valid.
Explanation: No additional information is available
for this message.
COPTDM112E The SSH user name " VALUE_0 " is not
valid.
Explanation: No additional information is available
for this message.
COPTDM113E The value of the variable VALUE_0 is
not specified.
Explanation: No additional information is available
for this message.
COPTDM114E The DCM object ID
VALUE_0
is
locked in the same deployment request
(ID:
VALUE_1
).
Explanation: No additional information is available
for this message.
COPTDM115E No device model is associated with
resource " VALUE_0 ".
Explanation: No additional information is available
for this message.
COPTDM116E At least one power supply is required
for device ID " VALUE_0 ".
Explanation:
No additional information is available
for this message.
COPTDM117E The system cannot unlock the DCM
object ID VALUE_0 because it is not
locked.
Explanation: No additional information is available
for this message.
COPTDM118E The VALUE_0 output file is not
specified.
Explanation:
The output dump file or scan file from
the discovery technology has not been specified.
Operator response: Verify that the discovery
workflows specify a valid file name.
160
Tivoli Intelligent Orchestrator Problem Determination and Troubleshooting Guide