
Created February 23, 1997
Testing the Model 2 Printer
The printer test button is located under the printer
cover and can only be used when the cover is
open. This button runs a test that lets you know
that the print head is seated properly and the
printer is working correctly. Use this button each
time you install the paper, ribbon cartridge, or print
head.
CAUTION:
For safety when running the printer test, make
sure personal articles such as ties, necklaces,
or bracelets do not get caught in the moving
print head.
To run the printer test:
1
Raise the printer cover.
2
Press the T button.
Button
T
Figure
2-14. Test Button on Model 2 Printer
3
A test begins that prints two lines of 38
characters in both stations. A quick visual
scan verifies that the printer is printing
correctly.
I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H
I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H I H
Figure
2-15. Printer Test Pattern
4
Tear off the customer receipt paper before
closing the cover.
Operating the Model 3 or 4 Point
of Sale Printer
Note: Consult your store procedures or
authorized personnel at your store for information
on inserting documents.
Model 3 and 4 printers have two buttons located
on the top and three on the front. These buttons
are used to:
Advance journal station paper
Advance customer receipt station paper
Advance an inserted document a preset
number of lines (Ready)
Advance an inserted document
Withdraw an inserted document
Run tests on the printer
The buttons on a Model 3 printer differ slightly in
appearance, but their function remains the same.
Advance Journal Button
Customer Receipt Advance Button
Ready Button
Document Insert Up button
Document Insert Down button
Figure
2-16. Buttons on Model 4 Printer
Inserting Documents in the Model
3 or 4 Printer
When you want to print on a check or form, insert
the document into the printer at the front or at the
top.
Chapter 2. Operating Point-of-Sale I/O Devices
2-11
Summary of Contents for 4693
