IBM 4693, Installation And Operation Manual, Page: 43 / 74

Created February 23, 1997
Inserting Documents in the Model 2 Printer
Note: Consult your store procedures for information on the correct method of operating the document
insert station.
When you want to print on a check or form, insert the document into the document insert station. You can
insert the document at either the front or the side. Consult your store procedures or authorized personnel
at your store for information on inserting documents. You can insert documents that are fastened
together, provided they are not fastened together on the right side.
Note: Do not insert a document with staples, metal inserts, or holes in the area to be printed.
Inserting a Document at the Front
1
Insert the document with the side to be
printed facing up.
2
Push the document against the right wall of
the insert station and forward until it comes
to a stop.
Inserting a Document at the Side
Your store procedures or a message on your
terminal display may tell you which documents
should be inserted at the side. Use the raised
mark on the left side of the printer to help you line
up documents.
1
Insert the document, sliding it to the right as
far as it can go.
2
Be sure to line up your document correctly;
the first line of printing begins where the
mark is located.
3
Press the document insert button marked I
to manually close the station after the
document is lined up correctly. Pressing the
I button is not necessary if the printer has
been programmed to close automatically.
If the document needs to be adjusted after
you have closed the document insert station,
press the document insert button marked I
and adjust the document. Press the button
marked I again to close the document insert
station.
Right Wall
Figure 2-12. Inserting a Document at the Front of
Model 2 Printer
Raised
Mark
Figure 2-13. Inserting a Document at the Side of
Model 2 Printer
Chapter 2. Operating Point-of-Sale I/O Devices
2-9