IBM 3746-900, Installation Manual

Page: 84 / 276

3746-900 and service processor installation
5. ____ Check Enable NPM, and check Activate immediately (according to the
customer choice). Then enter the Network ID, Local node name which is the
name of the local PU for NPM = PU name in switched major node (refer to
Figure 2-51 on page 2-45). Modify the LU name (LU name for NPM defined
in VTAM), then click on OK.
Figure 2-49. NPM Management Menu
Note: To support NPM, the customer has to define a:
a. Switched major node, refer to the example given in Figure 2-51 on
page 2-45.
b. Resource resolution table, refer to the example given in Figure 2-50.
In these tables the CP and LU names must be equal to the names given in
NPM management (define in Figure 2-49.):
Ÿ
CPNAME (TESTNODP) = Local node name
Ÿ
LUNAME (TESTNA) = LU name
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\
DESCRIPTIVE NAME : 3746 MODEL 9ðð VTAMLST DEFINITION \
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\
BUILD STATEMENT - CONTROLLER INFO \
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\
TESTNOD BUILD MODEL=3746-9ðð,
X
NETID=SYSTSTAP, X
NEWNAME=TESTNOD, X
NPA=(YES,DR), X
VERSION=N/A
\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\
NPM VIRTUAL RESOURCES \
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
M9ððNPA GROUP LNCTL=SDLC,
X
NPARSC=YES, X
VIRTUAL=YES, X
NPACOLL=YES, X
ISTATUS=ACTIVE
TESTNODL LINE
.TESTNODP/
PU
.TESTNPA/
LU
\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\
END OF GEN SOURCE \
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
\
GENEND
GENEND
END
Figure 2-50. Example of Resource Resolution Table
2-44
3746-900: Installation Guide