IBM 3746-900, Installation Manual

Page: 55 / 276

3746-900 and service processor installation
8) ____ In <SYSTEM> square box enter:
a) ____ Click on the SysDescr right button
b) ____ Select the 3746-9x0.
9) ____ In <Community> square box enter:
a) Session/Community name
b) IP address of community name owner
c) Select privileges (read or write)
10) ____ In <Trap Community> square box enter:
a) Session/Trap Community name
b) IP address of network manager
11) ____ Click on Save configuration then click on Send configura-
tion
12) ____ Click on OK
13) ____ Click on Cancel
Go to step 6
Step 6. Disconnect the Ethernet Bridge
a. ____ Refer to Figure 2-12 on page 2-11, and disconnect the power
cord
.B/
first from the Ethernet Bridge and then from the ac outlet
distribution box.
b. ____ Remove cable
.A/
from the SPAU (8228) plug.
Do you have to install a 8228 ?
Ÿ
Yes, go to step 7 on page 2-16.
Ÿ
No, go to step 8 on page 2-19 .
Chapter 2. Connecting the 3746-900 to the Power and Devices
2-15