IBM 24 User Manual Download Page 50

Page: 50 / 322

PSF/400 V3.1, V3.2, and V3.6

– OS/400 AFP=Yes, V2.2, V2.3, and V3.0.5

PSF for AIX V2.1

PSF/2 V2.0

For detailed information, review the appropriate PSF documentation or access
information at

http://www.can.ibm.com/ibmprinters.

Obtaining Adobe Acrobat Portable Data Files

This manual is available in Adobe Acrobat Portable Data File (PDF) format for online
viewing and printing. To obtain this manual in PDF format:

1. Access the IBM Home Page at

http://www.ibm.com or the IBM Printing Systems

Company Home Page at

http://www.can.ibm.com/ibmprinters.

2. At the IBM Home Page, use the Search tool and search for Network Printer 24 or

24PS.

3. At the IBM Printing Systems Home Page, select Printer Drivers/Product Updates.

4. Use the menu selections to find freeware, printer drivers, software fixes, or

documentation that you want to obtain.

User's Guide

Summary of Contents for 24



































































































































































































































































































































Search results

Summary of Contents for 24

Reviews:

Related manuals for 24

Brands by name

Popular brands

IBM 24, User Manual

Search results

Summary of Contents for 24

Reviews:

Related manuals for 24

Brands by name

Popular brands