Instructions
2.6.2
Heating Insert for µ–Dishes
The Heating Insert for µ–Dishes fits dishes with a diameter of 35 mm (e.g. ibidi µ–Dish
35mm, high
).
Center the dish in the insert, before you put the holder on.
Figure 9: Heating Insert for µ–Dish
35mm, high
To make sure that µ–Dishes are properly placed, the holder of the insert must apply a diagonal force
in order to snap the dishes into a fixed position. This will leave an inclined gap between the holder
and the insert, as shown in Figure
, but this is intended to keep the dishes in place.
Figure 10: Schematic Drawing of µ–Dish
35mm, high
in the Heating Insert. To ensure a tight fit, the lid
of the Insert is tilting when closed.
Warning!
Heated Plate, Heated Lid, and Heating Inserts are positioned by strong Neodym Magnets!
Please contact us for a non-magnetic system, in the case that permanent magnetic fields will
disturb your experiment!
22
Heating System
Version (26th April 2017)
