Instructions
Description
Short name
Drawing
Heating Insert for µ–Slides.
1 temperature sensor
1 perforated ibidi µ–Slide 8 Well
1 perforated ibidi µ–Dish
35mm, high
1 perforated ibidi µ–Dish
35mm, low
Temperature Ad-
justment Set
Power cable for the Temperature
Controller
Power cable
USB cable to connect the Tempera-
ture Controller with a computer
USB cable
2.2
Combination Options
The parts of the Heating System are combined as shown in Figure
. The Heated Lid and Heated
Plate fit on a microscope stage equipped with a universal mounting frame for multiwell plates. They
are connected to the Temperature Controller.
The Heating System can be combined with the Gas Mixer unit, that provides CO
2
and O
2
(optional)
control and a defined humidified atmosphere. Detailed information on the Gas mixer unit is given
in the Gas Mixer instructions.
To hold several geometries of Slides and Dishes, the Heated Plate can be equipped with different
Inserts (Section
): Insert for µ–Dish
35mm, high
, Insert for µ–Dish
35mm, low
and Insert for µ–Slides.
Version (26th April 2017)
Heating System
17
