Instructions
Installation Requirements
To ensure operation safety and optimal performance, meet the following conditions:
1. Only operate the ibidi Heating Devices with an ibidi Temperature Controller and with the sup-
plied power cable.
2. Ensure that the power plug of the power supply is well accessible. The Heating Devices must
be installed in a manner that they do not hinder the access to the external power supply and its
power plug.
3. Only operate the Heated Plate with original ibidi inserts.
4. Operate the Heating System in a temperature range of 18-30°C.
5. Operate the Heating System in a humidity range of up to 80% RH.
6. Operate the Heating System in an atmospheric pressure range of 800-1060 hPa.
7. Do not operate the Heating System under conditions that pose a risk of explosion, implosion,
or the release of gases.
8. Avoid strong magnetic fields and sources of high frequency. The Heating System might not
function properly when located near a strong magnetic field or high frequency source.
9. Avoid vibrations from vacuum pumps, centrifuges, electric motors, processing equipment, and
machine tools.
10. Avoid dust and corrosive gas. Do not install the Heating System where it could be exposed to
high levels of dust or to outside air or ventilation outlets.
11. Do not install the Heating System in a location where it could be exposed to direct sunlight.
12. Install the Heating System in a horizontal and stable position, which includes a table, bench or
desk upon which the instrument is installed.
13. Install the Heating System in a location that enables easy access for maintenance.
14. Do not place heavy objects on the instrument.
10
Heating System
Version (26th April 2017)
