IBC SOLAR AeroFix 10-EW, Installation Instructions Manual

Page: 6 / 74

6
Version 20.01, 20-July-2020

TAB (technical closing conditions for connecting to the low-voltage grid of power supply
companies)

VDEW guidelines (guidelines for connection and parallel operation of decentralised power
generation in the low-voltage grid)

Notes on solar from the German Institute of Civil Engineering (DIBt), in the current edition

DIBt building regulation list, in the current edition

DIN 4102-1:1998 Fire behaviour of building materials and elements
– part 1: Building materials;
classification, requirements and tests

DIN EN 13501-1:2010-01 Fire classification of construction products and building elements
– part
1: Classification using the results from fire behaviour tests on construction products

EN 1991-1-3 (General actions
– snow loads)

EN 1991-1-4 (General actions
– wind loads)

EN 1993-1-1 Design of steel structures: General rules and rules for buildings

EN 1995-1-1 Design of timber structures

EN 1999-1-1 Design of aluminium structures

General certificate of building approval Z-30.3-6: Products, connecting devices and structural
components made from stainless steel

DIN 4426 Equipment for building maintenance - Safety requirements for workplaces and
accesses - Design and construction

DGUV Information 203-080 - Installation and maintenance of PV systems

DGUV Information 201-056 - Planning principles of anchor devices on roofs

Model Building Regulation (MBO) / state building regulations

Note paper from BSW-Solar Securing the position of PV flat roof systems against displacement
due to thermal expansion ("temperature hike")
Solar modules
Framed solar modules may only be used if they fulfill the following criteria:

Module dimensions according to 10 System security device

Module manufacturers approval regarding module clamping

Hold valid IEC 61215 / IEC 61646 and protection class II / IEC 61730