IBC SOLAR AeroFix 10-EW, Installation Instructions Manual

Page: 33 / 74

33
Version 20.01, 20-July-2020
Important information:
We recommend that you use stones with the following measurements (w x l x h):

NF 11,5 x 24 x 7,1 cm

2DF 11,5 x 24 x 11,3 cm

3DF 17,5 x 24 x 11,3 cm

Stone 40 x 40 x 4 cm
The ballast should always be placed under the module. The max. ballasting potential on the base rail is
and corresponds, in the above-mentioned blocks, the AeroFix 15-S (AeroFix 10-S / AeroFix 10-EW):
If the system has to be loaded with more than 42 kg (28 kg) per module a ballast rail is necessary.
The assignment of the ballast track should always be done from the outside inward. When using the
ballast stones recommended here, a maximum weighting of up to 120 kg/module is possible when the
ballast rail is used in combination with the base rail.
Important information:
When using alternative ballast rails (i.e. L-profiles) and alternative ballast materials (i.e. concrete slabs) the
adequate corrosion protection and frost resistance of materials is to ensure!
Fig. 43: Ballasting oft he base rail
Fig. 44: Assignment of ballast rail