PORTABLE QUICK START
GUIDE
1. Remove Portable from the rigid nylon travel
case.
2. Unlatch the butterfly clasps (45watt does not
have clasps) and open panels flat.
3. Unfold tilt legs and place panels in direct
sunlight.
4. Clip the red alligator clip to the negative
battery terminal.
5. You are now charging your batteries.
1. Remove Portable from the rigid nylon travel
case
2. Unlatch the butterfly clasps (45watt does not
have clasps) and open panels flat.
3. Unfold tilt legs and place panels in direct
sunlight.
4. Remove/unclip the alligator clips at the SAE
connection.
5. Plug the SAE lead from the panel into the
sidewall port on your RV.
6. You are now charging your batteries.
* First time you use the unit you may need to configure the charge controller for the
appropriate battery type.
(541) 728-0924
ZampSolar.com
ALLIGATOR CLIPS
SIDE WALL
SOLAR PORT
