iB-WRX150NE
150M Extreme Wireless-N Router
- 85 -
2. How do I configure the Router to access the Internet by Ethernet users?
6) Open the Router Web Based Menu and Login the Router, select the “
Network Settings
”
menu on the left of your browser, and click "
WAN
" submenu. On the
WAN
page, select
“Dynamic IP” for "WAN Connection Type", finish by clicking
Save
7) Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, log in to the Router and click the "
Network Settings
" menu link on the left of
your browser, and then click "
MAC Cloning
" submenu link. On the "
MAC Cloning
" page,
if your PC’s MAC address is proper MAC address, click the
Cloning MAC Address
button and your PC’s MAC address will fill in the "WAN MAC Address" field. Or else, type
the MAC Address into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the
Save
button. It will take effect after restart.
Figure A-3 MAC Cloning
2. I want to use NetMeeting, what do I need to do?
1) If you start NetMeeting as a sponsor, you don’t need to do anything with the Router.
2) If you start as a response, you need to configure Virtual Server or DMZ Host and make
sure the H323 ALG is enabled.
3) How to configure Virtual Server: Log in to the Router, click the “
Forwarding
” menu on
the left of your browser, and click "
Virtual Servers
" submenu. On the "
Virtual Servers
"
page, click
Add New…
. Then on the “
Add or Modify a Virtual Server Entry
” page,
enter “1720” for the “Service Port” blank, and your IP address for the “IP Address” blank,
taking 192.168.1.169 for an example, remember to
Enable
and
Save
.
Figure A-4 Virtual Servers
