iB-WRX150NE
150M Extreme Wireless-N Router
- 50 -
4. Select the protocol used for Incoming Ports from the
Incoming Protocol
drop-down list,
either
TCP
or
UDP
, or
All.
5. Select
Enabled
in
Status
field.
6. Click
the
Save
button to save the new rule.
Figure 4-48 Add or Modify a Port Triggering Entry
To modify or delete an existing entry:
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disable All
button to make all entries disabled.
Click the
Delete All
button to delete all entries
Note:
1. When the trigger connection is released, the corresponding opening ports will be closed.
2. Each rule is allowed to be used only by one host on LAN synchronously. The trigger
connection of other hosts on LAN will be refused.
3. Incoming Port Range cannot overlap each other.
4.9.3 DMZ
Choose menu “
Forwarding
→
DMZ
”, you can view and configure DMZ host in the screen as
shown in Figure 4-49. The DMZ host feature allows one local host to be exposed to the Internet
for a special-purpose service such as Internet gaming or videoconferencing. DMZ host forwards
all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client
function disabled and should have a new static IP Address assigned to it because its IP Address
may be changed when using the DHCP function.
