iB-WRX150NE
150M Extreme Wireless-N Router
- 25 -
4.6.1 LAN
Choose menu “
Network Settings
→
LAN
”, you can configure the IP parameters of the LAN on
the screen as below.
Figure 4-21 LAN
MAC Address
-
The physical address of the Router, as seen from the LAN. The value can't
be changed.
IP Address -
Enter the IP address of your Router (factory default: 192.168.1.1).
Subnet Mask -
An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Note:
a. If you change the IP Address of LAN, you must use the new IP Address to log in the Router.
b. If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the DHCP
server will change accordingly at the same time
，
while the Virtual Server and DMZ Host will
not take effect until they are re-configured.
4.6.2 WAN
Choose menu “
Network Settings
→
WAN
”, you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose
Dynamic IP
type,
and the Router will
automatically get IP parameters from your ISP. You can see the page as follows Figure
4-22:
