iB-WRX150NE
150M Extreme Wireless-N Router
- 52 -
Status -
The status of the port is displayed here. “Enabled” means that the port is still
active. Otherwise, the port is inactive.
Click
Refresh
to update the Current UPnP Settings List.
4.10 Security
Figure 4-51 The Security menu
There are four submenus under the Security menu as shown in Figure 4-51:
Basic Security
,
Advanced Security
,
Local Management
and
Remote Management.
Click any of them, and you
will be able to configure the corresponding function.
4.10.1 Basic Security
Choose menu “
Security
→
Basic Security
”, you can configure the basic security in the screen as
shown Figure 4-52.
Figure 4-52 Basic Security
VPN -
VPN Passthrough must be enabled if you want to allow VPN tunnels using IPSec,
PPTP, or L2TP protocols to pass through the Router’s firewall.
PPTP Passthrough -
Point-to-Point Tunneling Protocol (PPTP) allows the Point-to-Point
Protocol (PPP) to be tunneled through an IP network. To allow PPTP tunnels to pass
through the Router, keep the default,
Enabled
.
L2TP Passthrough
-
Layer 2 Tunneling Protocol (L2TP) is the method used to enable
Point-to-Point sessions via the Internet on the Layer 2 level. To allow L2TP tunnels to
pass through the Router, keep the default,
Enabled
.
IPSec Passthrough
-
Internet Protocol Security (IPSec) is a suite of protocols for
