IAI TB-02, Instruction Manual

Page: 78 / 420

3. Operation of CON Related Controllers
66
3.10 Position Editing
Set/edit the target position, speed, acceleration, deceleration and other data related to positions.
You can move the axis by jogging or inching.
Touch [Position edit] on the Menu 1 screen.
If a position edit password is other than “0000,” the password entry screen appears.
Enter the position edit password.
Touch [ENT].
The default position edit password is “0000.”
For how to change the position edit password, refer to
3.18, "Environment setting [Change Pos Edit Password]."
A position data table appears.
Touch [No. sel.] to set the position
number you want to set, and a table
showing the position number you have
just set appears.
To set data other than the target position,
speed, acceleration and deceleration
shown in the table, touch other position
number such as “000.”
Data of the selected position number appears. (Position Data Individual Edit Screen)
Touching [Mul. dis.] returns the screen to the position data
table display.
The contents of display and setting items should differ depending on the controller.
For a controller applicable for comment input to position data (Refer to 3.10.2)
Position data table screen Position Data Individual Edit Screen
Position No.