manualshive.com logo in svg

IAI TB-02, Instruction Manual

Share
Download
IAI TB-02 Instruction Manual Download Page 108

3. Operation of CON Related Controllers

 

96 

3.17  Information Display 

 

Information such as the controller version, manufacturing information and maintenance 

information is displayed. 

 

Touch [Information] on the Menu 1 screen. 

 

 

 

 

 

 

 

 

The information screen appears. 

 

Touch a button of the feature that you would like to display 

such as [Software version information]. 

 

 

 

 

 

[Software version information] 

 

Touch [Software version information] in Information screen. 

 

Software version information screen opens. 

In this, shows the series/type of the controller and versions 

of the controller and this teaching pendant. 

 

Touch [Edit Axis Name] and the name of axes can be 

edited. 

Refer to [3.17.1 Axis Name Edit] for how to edit an axis 

name. 

 

 

 

 

[Network information] 

 

Touch [Network information] in Information screen. 

 

Network information screen opens. 

In this, shows various of information regarding the network. 

 

 

 

 

 

 

 

Summary of Contents for TB-02





































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands