manualshive.com logo in svg

Hyundai Tucson 2013, Owner'S Manual

The Hyundai Tucson 2013 Owner's Manual is a comprehensive guide that provides detailed information about your vehicle. Get the most out of your Tucson with this easy-to-use manual, available for free download at manualshive.com. Discover troubleshooting tips, maintenance schedules, and helpful hints to enhance your driving experience.

Share
Download
background image

Maintenance

24

7

ENGINE OIL

Checking the engine oil level  

1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach

normal operating temperature.

3. Turn the engine off and wait for a few

minutes (about 5 minutes) for the oil to
return to the oil pan.

4. Pull the dipstick out, wipe it clean, and

re-insert it fully.

5. Pull the dipstick out again and check

the level. The level should be between
F and L.

If it is near or at L, add enough oil to bring
the level to F.

Do not overfill.

Use a funnel to help prevent oil from
being spilled on engine components.

Use only the specified engine oil. (Refer
to “Recommended lubricants and capaci-
ties” in section 8.)

WARNING - 

Radiator hose

Be very careful not to touch the
radiator hose when checking or
adding the engine oil as it may be
hot enough to burn you.

OLM079003N

OLM079004N

CAUTION

• Do not overfill the engine oil. It

may damage the engine.

• Do not spill engine oil, when

adding or changing engine oil. If
you drop the engine oil on the
engine room, wipe it off immedi-
ately.

CAUTION - 

Diesel engine

Overfilling the engine oil may cause
severe dieseling due to churning
effect. It may lead to engine damage
accompanied with abrupt engine
speed increment, combustion noise
and white smoke emission.

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2013

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
3SIXT 3S-1186 Operating Instructions Manual preview
3S-1186
Brand: 3SIXT Pages: 12
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
ULTIMATE SPEED 279619 Instructions For Use And Safety Manuallines preview
279619
Brand: ULTIMATE SPEED Pages: 40
Safe Fleet PRIME DESIGN VRR3-FT21G-ST Manual preview
PRIME DESIGN VRR3-FT21G-ST
Brand: Safe Fleet Pages: 12
RAM 2013 2500 Big Horn Information preview
2013 2500 Big Horn
Brand: RAM Pages: 12
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19
Great day UVFR751 Instructions For Installation And Use preview
UVFR751
Brand: Great day Pages: 5
Whispbar K509 Fitting Instructions Manual preview
K509
Brand: Whispbar Pages: 34
Ford FLEX 2019 Quick Reference Manual preview
FLEX 2019
Brand: Ford Pages: 10
Fiat Panda 2015 Owner'S Handbook Manual preview
Panda 2015
Brand: Fiat Pages: 204
Buzz Rack Atomic Buzz Manual preview
Atomic Buzz
Brand: Buzz Rack Pages: 8
Soundoff Signal ETSS100CBKFV-BP Quick Start Manual preview
ETSS100CBKFV-BP
Brand: Soundoff Signal Pages: 2
Cramaro FARP WORKS CRUSHED CAR Manual preview
FARP WORKS CRUSHED CAR
Brand: Cramaro Pages: 8
Faria Fuel Manager Owner'S Manual preview
Fuel Manager
Brand: Faria Pages: 12
Motorola 68014301013 User Manual preview
68014301013
Brand: Motorola Pages: 36

Brands by name

Popular brands

Load more brands