manualshive.com logo in svg

Hyundai Tucson 2013, Owner'S Manual

The Hyundai Tucson 2013 Owner's Manual is a comprehensive guide that provides detailed information about your vehicle. Get the most out of your Tucson with this easy-to-use manual, available for free download at manualshive.com. Discover troubleshooting tips, maintenance schedules, and helpful hints to enhance your driving experience.

Share
Download
background image

4 89

Features of your vehicle

Climate control air filter 
(if equipped)

The climate control air filter installed
behind the glove box filters the dust or
other pollutants that come into the vehi-
cle from the outside through the heating
and air conditioning system. If dust or
other pollutants accumulate in the filter
over a period of time, the air flow from the
air vents may decrease, resulting in
moisture accumulation on the inside of
the windshield even when the outside
(fresh) air position is selected. If this hap-
pens, have the climate control air filter
replaced by an authorized HYUNDAI
dealer.

✽

NOTICE

• Replace the filter according to the

Maintenance Schedule.

If the car is being driven in severe

conditions such as dusty, rough roads,

more frequent climate control air fil-

ter inspections and changes are

required.

• When the air flow rate is suddenly

decreased, the system should be

checked at an authorized HYUNDAI

dealer.

Checking the amount of air con-
ditioner refrigerant and compres-
sor lubricant

When the amount of refrigerant is low,
the performance of the air conditioning is
reduced. Overfilling also has a bad influ-
ence on the air conditioning system.
Therefore, if abnormal operation is
found, have the system inspected by an
authorized HYUNDAI dealer.

✽

NOTICE

It is important when servicing the air

conditioning system that the correct

type and amount of oil and refrigerant is

used. Otherwise, damage to the com-

pressor and abnormal system operation

may occur. 

1LDA5047

Outside air

Recirculated

air

Climate control

air filter

Blower

Evaporator

core

Heater core

WARNING

The air conditioning system should
be serviced by an authorized
HYUNDAI dealer. Improper service
may cause serious injury to the
person performing the service.

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2013

JAC S5 Workshop Manual preview
S5
Brand: JAC Pages: 70
Federal Signal Corporation CommCenter D1 Series Installation And Service Instructions Manual preview
CommCenter D1 Series
Brand: Federal Signal Corporation Pages: 16
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Safe Fleet RVS-082550 Instruction Manual preview
RVS-082550
Brand: Safe Fleet Pages: 11
Camec 042374 User Manual preview
042374
Brand: Camec Pages: 19
Maserati Quattroporte Automatic Owner'S Manual preview
Quattroporte Automatic
Brand: Maserati Pages: 272
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Mazda 2010 MX-5 Miata Specification preview
2010 MX-5 Miata
Brand: Mazda Pages: 8
Toyota RAV-4 2015 Series Owner'S Manual Supplement preview
RAV-4 2015 Series
Brand: Toyota Pages: 50
Istar PI00670 Instruction Manual preview
PI00670
Brand: Istar Pages: 6
Whispbar K423W Fitting Instructions Manual preview
K423W
Brand: Whispbar Pages: 18
XTC RZR-SW-USB-2B Manual preview
RZR-SW-USB-2B
Brand: XTC Pages: 2
injen technology SP7035 Installation Instructions preview
SP7035
Brand: injen technology Pages: 3
Toyota 20111 Highlander Brochure preview
20111 Highlander
Brand: Toyota Pages: 9
Prorack K890 Fitting Instructions Manual preview
K890
Brand: Prorack Pages: 15
Metra Electronics 99-8206 Installation Instructions Manual preview
99-8206
Brand: Metra Electronics Pages: 12

Brands by name

Popular brands

Load more brands