manualshive.com logo in svg

Hyundai Tucson 2013, Owner'S Manual

The Hyundai Tucson 2013 Owner's Manual is a comprehensive guide that provides detailed information about your vehicle. Get the most out of your Tucson with this easy-to-use manual, available for free download at manualshive.com. Discover troubleshooting tips, maintenance schedules, and helpful hints to enhance your driving experience.

Share
Download
background image

6 5

What to do in an emergency

EMERGENCY STARTING

Connect cables in numerical order and
disconnect in reverse order.

Jump starting  

Jump starting can be dangerous if done
incorrectly. Therefore, to avoid harm to
yourself or damage to your vehicle or
battery, follow the jump starting proce-
dures. If in doubt, we strongly recom-
mend that you have a competent techni-
cian or towing service jump start your
vehicle.

CAUTION

Use only a 12-volt jumper system.
You can damage a 12-volt starting
motor, ignition system, and other
electrical parts beyond repair by
use of a 24-volt power supply (either
two 12-volt batteries in series or a
24-volt motor generator set).

WARNING

- Battery

• Keep all flames or sparks away

from the battery. The battery pro-
duces hydrogen gas which may
explode if exposed to flame or
sparks.
If these instructions are not fol-
lowed exactly, serious personal
injury and damage to the vehicle
may occur! If you are not sure
how to follow this procedure,
seek qualified assistance.
Automobile batteries contain sul-
furic acid. This is poisonous and
highly corrosive. When jump
starting, wear protective glasses
and be careful not to get acid on
yourself, your clothing or on the
vehicle.

• Do not attempt to jump start the

vehicle if the discharged battery
is frozen or if the electrolyte level
is low; the battery may rupture or
explode.

WARNING

- Battery

Never attempt to check the elec-
trolyte level of the battery as this
may cause the battery to rupture or
explode causing serious injury.

1VQA4001

Discharged battery

Jumper Cables

Booster battery

(-)

(+)

(+)

(-)

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2013

J-Top COMPACT Instructions preview
COMPACT
Brand: J-Top Pages: 2
Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Waeco MagicWatch MWE800 Installation And Operating Manual preview
MagicWatch MWE800
Brand: Waeco Pages: 212
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Chevrolet Avalanche 2005 Owner'S Manual preview
Avalanche 2005
Brand: Chevrolet Pages: 494
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Kia Sorento Owner'S Manual preview
Sorento
Brand: Kia Pages: 51
RAM Ram 3500 2012 Specifications preview
Ram 3500 2012
Brand: RAM Pages: 13
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Mercedes-Benz 240 D 1979 Owner'S Manual preview
240 D 1979
Brand: Mercedes-Benz Pages: 91
Draw tite 77971 Installation Instructions preview
77971
Brand: Draw tite Pages: 4
Tesla MODEL Y Owner'S Manual preview
MODEL Y
Brand: Tesla Pages: 274

Brands by name

Popular brands

Load more brands