manualshive.com logo in svg

Hyundai Tucson 2013, Owner'S Manual

The Hyundai Tucson 2013 Owner's Manual is a comprehensive guide that provides detailed information about your vehicle. Get the most out of your Tucson with this easy-to-use manual, available for free download at manualshive.com. Discover troubleshooting tips, maintenance schedules, and helpful hints to enhance your driving experience.

Share
Download
background image

4 53

Features of your vehicle

Engine oil pressure warn-
ing  

This warning light indicates the engine oil
pressure is low.
If the warning light illuminates while driv-
ing:
1. Drive safely to the side of the road and

stop.

2. With the engine off, check the engine

oil level. If the level is low, add oil as
required.

If the warning light remains on after
adding oil or if oil is not available, call an
authorized HYUNDAI dealer.

Parking brake & brake
fluid warning 

Parking brake warning 

This light is illuminated when the parking
brake is applied with the ignition switch in
the START or ON position. The warning
light should go off when the parking
brake is released.

Low brake fluid level warning

If the warning light remains on, it may
indicate that the brake fluid level in the
reservoir is low.
If the warning light remains on:
1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check the

brake fluid level immediately and add
fluid as required. Then check all brake
components for fluid leaks.

3. Do not drive the vehicle if leaks are

found, the warning light remains on or
the brakes do not operate properly.
Have it towed to any authorized
HYUNDAI dealer for a brake system
inspection and necessary repairs.

CAUTION

If the engine is not stopped immedi-
ately after the engine oil pressure
warning light is illuminated, severe
damage could result.

CAUTION

If the oil pressure warning light
stays on while the engine is run-
ning, serious engine damage may
result. The oil pressure warning
light comes on whenever there is
insufficient oil pressure. In normal
operation, it should come on when
the ignition switch is turned on,
then go out when the engine is
started. If the oil pressure warning
light stays on while the engine is
running, there is a serious malfunc-
tion.
If this happens, stop the car as
soon as it is safe to do so, turn off
the engine and check the oil level. If
the oil level is low, fill the engine oil
to the proper level and start the
engine again. If the light stays on
with the engine running, turn the
engine off immediately. In any
instance where the oil light stays on
when the engine is running, the
engine should be checked by an
authorized HYUNDAI dealer before
the car is driven again.

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2013

Happy Orange USB-C Quick Start Manual preview
USB-C
Brand: Happy Orange Pages: 2
Cadillac ESCALADE - BROCHURE 2009 Personalization Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 24
Cadillac Escalade Personalization Manual preview
Escalade
Brand: Cadillac Pages: 20
Cadillac Escalade 2016 Convenience/Personalization Manual preview
Escalade 2016
Brand: Cadillac Pages: 20
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
Conrad 75 16 30 Operating Instructions Manual preview
75 16 30
Brand: Conrad Pages: 26
Ford 2003 Thunderbird Owner'S Manual preview
2003 Thunderbird
Brand: Ford Pages: 200
CITROEN PICASSO XSARA DESIRE 1.6 - MESUREMENT Manual preview
PICASSO XSARA DESIRE 1.6 - MESUREMENT
Brand: CITROEN Pages: 2
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
Ecco 13 Series Installation And Operation Instructions Manual preview
13 Series
Brand: Ecco Pages: 24
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33

Brands by name

Popular brands

Load more brands