Hyundai Tucson 2013 Owner'S Manual Download Page 111

Page: 111 / 407

Features of your vehicle

Opening the fuel filler lid

The fuel-filler lid must be opened from
inside the vehicle by pulling up the fuel-
filler lid opener.

✽

NOTICE

If the fuel-filler lid does not open

because ice has formed around it, tap

lightly or push on the lid to break the ice

and release the lid. Do not pry on the lid.

If necessary, spray around the lid with

an approved de-icer fluid (do not use

radiator anti-freeze) or move the vehicle

to a warm place and allow the ice to

melt.

1. Stop the engine.
2. To open the fuel filler lid, pull the fuel

filler lid opener up.

3. Pull the fuel filler lid (1) out to fully

open.

4. To remove the cap (2), turn the fuel

tank cap counterclockwise.

5. Refuel as needed.

Closing the fuel filler lid

1. To install the cap, turn it clockwise until

it “clicks”. This indicates that the cap is
securely tightened.

2. Close the fuel filler lid and push it light-

ly and make sure that it is securely
closed.

FUEL FILLER LID

OSA047022

OLM049028

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Search results

Summary of Contents for Tucson 2013

Reviews:

Related manuals for Tucson 2013

Brands by name

Popular brands

Hyundai Tucson 2013, Owner'S Manual

Search results

Summary of Contents for Tucson 2013

Reviews:

Related manuals for Tucson 2013

Brands by name

Popular brands