4 139
Features of your vehicle
1. Press button.
2. Say “Set Up”.
- The system replies with available
commands.
- To skip the information message,
press
again and then a beep is
heard.
3. Say “Pair Phone”
4. Proceed at Next step.
5. Say the name of your phone when
prompted.
- Use any name to uniquely describe
your phone.
- Use Full name to voice tag.
- Not use to short name or similar to
voice command.
6.
Bluetooth
®
wireless technology sys-
tem will repeat the name you stated.
7. Say "Yes" to confirm.
8. The audio displays “searching ----
passkey: 0000” and asks you to initiate
pairing procedure from the phone.
9. Search the
Bluetooth
®
wireless tech-
nology system on your phone .Your
phone should display your [vehicle
model name] on the
Bluetooth
®
wire-
less technology device list. Then
attempt pairing on your phone.
10. After Pairing is completed, your
phone will start to transfer phone/
contact list to the audio system.
- This process may take from a few
minutes to over 10 minutes depend-
ing on the phone model and number
of entries in the phone/contact list.
11. By manual operation:
- Select “PAIR” in PHONE menu,
thenproceed from step 5
Note:
• Until the audio displays “Transfer
Complete”,
Bluetooth
®
wireless
technology hands-free feature may
not be fully operational.
• If the phone is paired to two or more
vehicles of the same model, some
phones may not handle
Bluetooth
®
wireless technology devices of that
name correctly. In this case, you
may need to change the name dis-
played on your phone.
For example, if the vehicles' name is
HMC, you may need to change the
name displayed on you phone from
HMC.
Refer to your phone User’s Guide,
or contract your cellular carrier or
phone manufacturer for instruc-
tions.
• Connecting phone
When the
Bluetooth
®
wireless technolo-
gy system is enabled, the phone previ-
ously used is automatically selected and
re-connected. If you want to select differ-
ent phone previously paired, the phone
can be selected through “Select Phone”
menu.
Only a selected phone can be used with
the hands-free system at a time.
1. Press button.
2. Say "Set Up".
3. Say "Select Phone" after prompt
- The system lists all the registered
phone names.
4. Say the name or number of desired
phone from the list.
5. Say "Yes" to confirm.
6. By manual operation:
- Select “SELECT” in PHONE menu,
then select desired phone from the
list.
