manualshive.com logo in svg

Hyundai Tucson 2013, Owner'S Manual

The Hyundai Tucson 2013 Owner's Manual is a comprehensive guide that provides detailed information about your vehicle. Get the most out of your Tucson with this easy-to-use manual, available for free download at manualshive.com. Discover troubleshooting tips, maintenance schedules, and helpful hints to enhance your driving experience.

Share
Download
background image

Driving your vehicle

8

5

ENGINE START/STOP BUTTON (IF EQUIPPED)

Illuminated engine start/stop but-
ton

Whenever the front door is opened, the
engine start/stop button will illuminate for
your convenience. The light will go off
after about 30 seconds when the door is
closed. It will also go off immediately
when the theft-alarm system is armed.

Engine start/stop button position

OFF

• With manual transaxle

To turn off the engine (START/RUN posi-
tion) or vehicle power (ON position), stop
the vehicle then press the engine
start/stop button.

• With automatic transaxle

To turn off the engine (START/RUN posi-
tion) or vehicle power (ON position),
press the engine start/stop button with
the shift lever in the P (Park) position.
When you press the engine start/stop
button without the shift lever in the P
(Park) position, the engine start/stop but-
ton will not change to the OFF position
but to the ACC position.
Also, the steering wheel locks when the
engine start/stop button is in the OFF
position to protect you against theft. It
locks when the door is opened or when
you pull out the smart key from the smart
key holder.

If the steering wheel is not locked prop-
erly when you open the driver's door, the
warning chime will sound. Try locking the
steering wheel again. If the problem is
not solved, have it checked by an author-
ized HYUNDAI dealer.
In addition, if the engine start/stop button
is in the OFF position after the driver's
door is opened, the steering wheel will
not lock and the warning chime will
sound. In such a situation, close the door.
Then the steering wheel will lock and the
warning chime will stop.

✽ 

NOTICE

If the steering wheel doesn't unlock

properly, the engine start/stop button

will not work. Press the engine

start/stop button while turning the

steering wheel right and left to release

the tension. 

OLM059005

Not illuminated 

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2013

LAMBORGHINI URUS Quick Manual preview
URUS
Brand: LAMBORGHINI Pages: 48
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Bestop 54822 Installation Instructions Manual preview
54822
Brand: Bestop Pages: 11
Whispbar K455W Fitting Instructions Manual preview
K455W
Brand: Whispbar Pages: 14
Vauxhall 2014 Insignia VXR SuperSport Specifications preview
2014 Insignia VXR SuperSport
Brand: Vauxhall Pages: 56
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
Yakima Landing Pad 24 Quick Start Manual preview
Landing Pad 24
Brand: Yakima Pages: 11
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Alfa Romeo 1966 Spider 105 Faq preview
1966 Spider 105
Brand: Alfa Romeo Pages: 46
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
JBA 1674S Installation Instructions preview
1674S
Brand: JBA Pages: 5
Curt Group Aries 2074113 Installation Manual preview
Aries 2074113
Brand: Curt Group Pages: 2
LetsGoAero V2 Two-Bike Carrier User Manual preview
V2 Two-Bike Carrier
Brand: LetsGoAero Pages: 2
CaRobotor Y Pro Instruction Manual preview
Y Pro
Brand: CaRobotor Pages: 9

Brands by name

Popular brands

Load more brands