Hyundai Tucson 2013 Owner'S Manual Download Page 22 | Manualshive

Page: 22 / 407

background image

3 3

Safety system of your vehicle

WARNING

- Driver’s seat

• Never attempt to adjust seat

while the vehicle is moving. This
could result in loss of control,
and an accident causing death,
serious injury, or property dam-
age.

• Do not allow anything to interfere

with the normal position of the
seatback. Storing items against a
seatback or in any other way
interfering with proper locking of
a seatback could result in serious
or fatal injury in a sudden stop or
collision.

• Always drive and ride with your

seatback upright and the lap por-
tion of the seat belt snug and low
across the hips. This is the best
position to protect you in case of
an accident.

• In order to avoid unnecessary

and perhaps severe air bag
injuries, always sit as far back as
possible from the steering wheel
while maintaining comfortable
control of the vehicle. It is recom-
mended that your chest is at least
250 mm (10 inches) away from
the steering wheel.

WARNING -

Uprighting
seat

When you return the seatback to its
upright position, hold the seatback
and return it slowly and be sure
there are no other occupants
around the seat. If the seatback is
returned without being held and
controlled, the back of the seat
could spring forward resulting in
accidental injury to a person struck
by the seatback.

WARNING

-

Loose objects

Loose objects in the driver’s foot
area could interfere with the opera-
tion of the foot pedals, possibly
causing an accident. Do not place
anything under the front seats.

WARNING

-

Driver respon-

sibility for front seat pas-
senger

Riding in a vehicle with a front seat-
back reclined could lead to serious
or fatal injury in an accident. If a
front seat is reclined during an
accident, the occupant’s hips may
slide under the lap portion of the
seat belt applying great force to the
unprotected abdomen. Serious or
fatal internal injuries could result.
The driver must advise the front
passenger to keep the seatback in
an upright position whenever the
vehicle is in motion.

WARNING

Do not use a sitting cushion that
reduces friction between the seat
and passenger. The passenger's
hips may slide under the lap por-
tion of the seat belt during an acci-
dent or a sudden stop. Serious or
fatal internal injuries could result
because the seat belt can't operate
normally.

«
...
20
21
22
23
24
...
»

Summary of Contents for Tucson 2013
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2013

Brand: IAME Pages: 17

Brand: Toyota Pages: 35

Brand: travall Pages: 2

Brand: Gacell Pages: 12

Brand: ULTIMATE SPEED Pages: 40

Brand: Camoplast Pages: 19

spectroFlex Car Adapter

Brand: wtw Pages: 4

Brand: Bulldog Security Pages: 7

Brand: Axxess Pages: 4

Brand: Ultraplast Pages: 5

Brand: Yakima Pages: 10

Brand: A-Tach Mounts Pages: 2

Brand: Thule Pages: 1

Brand: Whispbar Pages: 15

Brand: Gator Pages: 18

Brand: Kuda-Phonebase Pages: 6

Brand: 3UVIEW Pages: 15

Brand: Chevrolet Pages: 88

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands