manualshive.com logo in svg

Hyundai LX2, Owner'S Manual

The Motorola LX2 is a high-performance device that offers advanced features and functionality. To make the most of this product, ensure you have the comprehensive User Manual at your disposal. Download the manual for free from manualshive.com and unlock the full potential of your Motorola LX2.

Share
Download
background image

7-39

7

Maintenance

ENGINE COOLANT

The high-pressure cooling system
has a reservoir filled with year-round
antifreeze coolant. The reservoir is
filled at the factory.
Check the antifreeze protection and
coolant concentration level at least
once a year, at the beginning of the
winter season, and before traveling
to a colder climate.

• When the engine overheats from

low engine coolant, suddenly
adding engine coolant may
cause cracks in the engine. To
prevent damage, add engine
coolant slowly in small quanti-
ties.

• Do not drive with no engine

coolant. It may cause  water
pump failure and engine seizure,
etc.

Checking the engine coolant
level

Check the condition and connections
of all cooling system hoses and
heater hoses. Replace any swollen
or deteriorated hoses.
The coolant level should be filled
between MAX and MIN (or F (Full)
and L (Low)) marks on the side of the
coolant reservoir when the engine is
cool.

If the coolant level is low, add enough
distilled (deionized) water. Bring the
level to MAX, (or F (Full)) but do not
overfill.
If frequent additions are required, we
recommend that the system be
inspected by an authorized HYUNDAI
dealer.

NOTICE

OLX2078007

OLX2078008

7-18

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LX2

UnderCover 2110 Installation Manual preview
2110
Brand: UnderCover Pages: 16
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
Dometic GROUP DRS2 Installation And Operating Manual preview
DRS2
Brand: Dometic GROUP Pages: 20
DAF PACCAR PACMOBILE 20 User Manual preview
PACCAR PACMOBILE 20
Brand: DAF Pages: 18
AC Schnitzer DKG Fitting Instructions Manual preview
DKG
Brand: AC Schnitzer Pages: 16
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
C-KO RS-4-18-R-I Fitting Instructions preview
RS-4-18-R-I
Brand: C-KO Pages: 4
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
Curt Manufacturing 58963 Installation Manual preview
58963
Brand: Curt Manufacturing Pages: 4
Whispbar K559W Fitting Instructions Manual preview
K559W
Brand: Whispbar Pages: 112
Scosche HUD580GC Manual preview
HUD580GC
Brand: Scosche Pages: 12
Aries 2051182 Installation Manual preview
2051182
Brand: Aries Pages: 3
Mazda MX-3 1995 Workshop Manual preview
MX-3 1995
Brand: Mazda Pages: 1001

Brands by name

Popular brands

Load more brands