Hyundai LX2 Owner'S Manual Download Page 181

Page: 181 / 597

3-93

Con

enience f

atur

Items

Explanation

Forward safety

To adjust the Forward Collision-Avoidance Assist function.

- Active assist
- Warning only
- Off

For more details, refer to the "Forward Collision-Avoidance Assist system" in chapter 5.

Lane safety

To adjust the Lane Keeping Assist (LKA) function.

- Lane Keeping Assist
- Lane Departure Warning
- Off

For more details, refer to the "Lane Keeping Assist (LKA) system" in chapter 5.

Blind-spot safety

• Blind-Spot View
To activate or deactivate the Blind-Spot View.

For more details, refer to the "Blind-Spot View" in this chapter.

• SEA(Safe Exit Assistance)
To activate or deactivate the Safe Exit Assistance.

For more details, refer to the "Safe Exit Assistance" in chapter 5.

• Active assist

• Warning only

• Off

For more details, refer to "Blind-spot Collision-Avoidance Assist (BCA)" or "Blind-spot Collision
Warning (BCW)" in chapter 5.

Parking safety

• Rear Cross-Traffic Safety

To Activate or deactivate the Rear Cross-Traffic Collision-Avoidance Assist function.

For more details, refer to “Rear Cross-Traffic Collision-Avoidance Assist (RCCA) system” in chapter 5.

2. Driver Assistance

Summary of Contents for LX2






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LX2

Reviews:

Related manuals for LX2

Brands by name

Popular brands

Hyundai LX2, Owner'S Manual

Search results

Summary of Contents for LX2

Reviews:

Related manuals for LX2

Brands by name

Popular brands